Contact Linux (Thane)08879497458/68 08879147554/56   |   Careers

Bending Stiffness Tester is used to measure the maximum force required to bend the test piece (paper or paperboard) to a specified angle. This extremely easy to use instrument has been manufactured to determine the resistance offered to a bending force (bending resistance) to a rectangular specimen, which is clamped along one side, measured under specified conditions. Bending resistance affects the product performance in many converting operations and end use application including packaging, printing, etc.

Bursting Strength is a widely used measure of resistance to rupture of various materials. A test specimen is held between two circular clamps and subjected to an increasing pressure from a rubber diaphragm. The rubber diaphragm is expanded by a controlled hydraulic pressure until the test specimen ruptures. The Bursting Strength of the specimen is the pressure reading at the time of rupture.

Thickness is an important property of paper or paperboard,and variations in thickness are also important especially for paper and paperboards used for mechanical purposes. The test is useful for research work, routine control, design of end-use products, and for acceptance testing for conformance to specification.

Cobb Test is the calculated mass of water absorbed in a specified time by 1 m of paper or board under specified conditions. The test area is 100 cm for Paper.

Coefficient of Friction Testing is extensively used in the packaging industry to measure the "slippyness" of a produck, with the aim of predicting feeding and running speed on an automatic gluing, erecting, filling or packaging line. This extremely easy to use instrument has been manufactured to determine the static and kinetic friction of plastic film, sheeting, paper and other sheeted material. The Coefficient of Friction Tester can measure Static COF from a resting position and continue to move testing surface in a relative motion to give an accurate kinetic cof RESULT. this COF Tester cmploys a stationary sled with a moving plane. The tes head automatically returns to the start position after testing is complete.

Container Compression Tester is an efficient and easy to use equipment intended for measuring the ability of Corrugated or Solid fiber shipping containers to resist external compressive forces. This method describes how to determine the resistance of a fiberboard shipping container to compressive forces. This is accomplished by placing the container between two flat platens, one of which is mechanically driven to compress the box. A recording device is incorporated to indicate the force and deformation (deflection) required to compress the container.

The Concora medium fluter produces specimens of corrugated board in circumstances similar to the production process. It is used for fluting a pre-cut strip of corrugated medium ready for performing the CMT (Concora Medium Test) and the CCT (Corruga-ted Crush Test).

Linux range of Crush Testers are designed for performing Ring Crush Test (RCT), Edge Crush Test (ECT), Flat Crush Test (FCT), Pin Adhesive Test (PAT), Concora Medium Test (CMT), Corrugated Crush Test (CCT) and other general compression tests, on a variety of materials like paper, paperboard, etc. These multi-functional equipments incorporate high accurate load cell and precise ball screw, which drives the compression platen steadily along the guide track to compress the specimen.

The falling dart tester determines the impact resistance of plastic film by the free falling dart method. The apparatus establishments the energy required to tear film specimens under specified conditions of impact of a free falling dart. The energy is expressed in terms of the weight of a dart 50% if the film specimens fail under the conditions specified. A range of weight is provided to be performed on various film thickness. The working range of the weight is estblished by finding the weight that will just break the sample film.

The drop test is performed to determine the ability of fiber board containers to withstand vertical impace in free drop. The test may be performed as a single test or multiple test to determine and analyses the conditions the ocour on a packaage during handling and transit. It serves as a effective equipment for package design and performance analysis before production and use.

Electronic Moisture Tester is an electrical resistance type digital moisture meter. It calculates on the basis of mass of water / mass of solids. Since the clectrical conductivity of paper is considerably effected not only by its moisture content, but also by the paper temperature and various substances contained in the paper, it is necessary to take these influences into consideration in the design of the moisture meters to ensure accurate readings. The hand closes naturally around the ergonomic form of the housing so the material to be measured. The thin pins make it easy to measure the moisture content of paper, paperboard and corrugated board up to maximum thickness of 25mm.

In paper manufacturing and user industry, the term for expressing the “Weight” per unit area, (more properly mass per unit area) of paper has been “basis weight”, “ream weight”, “substance”, or “grammage. Also in most countries, the mass per unit area is expressed in grams per square meter (gm.m). The area of several sheets of paper or paperboard is determined from linear measurement. The weight is determined by weighing. The grammage is calculated from the ratio of the mass to the area, after conversion to metric units when necessary.

Incline Impact testers are used to simulate the handling of boxes, crates, palatalized loads etc. The test provides you with the qualitative results and documentation required to substantiate the performance of your product or packaged system. Linux tester has articulating carriage system. This system allows the carriage to be loaded with a evil top surface for safety and convenience. After the test specimen is loaded, the top of the carriage is lowered into its testing configuration and drop sequences happen in the conventional method. All machine functions are controlled through a hand-held control pendant, allowing the machine operator the ability to position the carriage from different points around the machine. All potentially dangerous conditions are shielded and or safety interlocked for operator protection.

Linux Internal Plybond Tester is applied to testing internal bond strength of paper board. The paper bord sample is impact in a certain angle and weight, the energy it has absorbed indicates the internal bonding strength.it could five samples at a time.

Melt Flow Indexers are afordable bnch top instruments that measure the melt mass-flow rate (MRF) and melt volume-flow rate(MVR) of wide range of thermoplastic raw materials(guanulate). Melt Flow Index Tester is manufactured as per ASTM D 1238 to measure the flow rates of thermoplastics by extrusion plastometer. This test indicates the Uniformity of the flow rate of the polymer.

Packaging materials like board, boxes etc are subjected to handeling hazards and damage in use, similar to that occuring in this test, may result from contact with solid objects, such as the end of a piece of lumber or the cornor of a important parameter that determines the performance of such a material.

Linux Bendtsen Smoothness & Porosity Tester is used for determing the smoothness and porosity of paper,paperboard and similar is based on leak principal. A sample is placed on a perfect glass plate, measuring head on the test piece a controlled and small air pressure pass through a flat metal ring and the specimen. The pressure difference read off on selected rotameter tube. This instrument is similar to the Sheffield smoothness tester, but it has the ability to measure smoothness or roughness of paper and paperboard that is too rough for measurement with the Sheffield smoothness tester.

This method measures the force perpendicular to the plane of the paper required to tear multiple sheets of paper through a specified distance after the tear has been started using an Elmendorf type tearing tester. the measured results can be used to calculate the approximate tearing resistance of a single sheet.

Linux Digital single Column Tensile Tester is applicable inthe test of physical mechanical properties of polymers, plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage, textile,paper, protective film, leather, rubber and paper fiber etc. It can perform the test items of tensile, peeling, tearing deformation, heat seal, adhesive, etc. These multi-functional equipments incorporate imported motor & gearbox and high accurate load cell.

Bottle Compression Tester is an efficient and easy to use equipment intended for measuring the ability of bottle to resist external compressive forces. This method describes how to determine the resistance of a bottle to compressive forces. This is accomplished by placing the bottle between two flat platens, one of which is mechanically driven to compress the bottle. A recording device is incorporated to indicate the force required to compress the bottle. The compressive forces are related to some of those exerted on bottles in stack or encountered in transportation. The method is used to compare the compressive resistance of different lots of similar bottles or to compare bottles of different grades. In addition the information gained may be used to provide an indication of the load that a particular bottle may be able to withstand in service.

The cap torque tester accurately measures twist-on force. The torque Tester is an ideal tester for bottlers, food and beverage companies, and others who meed to measure closure torque. The tester features solid aluminum housing and rugged construction for many years of service in laboratory or production environments. Adjustable parts effectively grip a broad range of container shapes and sizes, while a set of optional jaws are available in an alternative gripping method. The bottle torque captures peak torque in clock wise direction for application and removal measurements.

Linux range of Crush Testers are designed for performing Tube Crush test, Core Crush Test, Cone Crush Test and other general compression test, on a variety of materials like paper, paperboard etc. These multi-functional equipments incorporate high accurate load cell and precise drive screw. which drives the compression platen steadily along the guide track to compress the specimen.

Linux Computerize Touch Screen Double Column Universal Tester is applicable in the test of physical mechanical properties of polymers, plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage, textile, paper, protective film, leather, rubber and paper fiber etc. It can perform the test items of tensile, compression, cof, peeling, tearing deformation, heat seal, adhesive, etc. These multi-functional equipments incorporate imported motor & gearbox, high accurate load cell and precise ball screw.

Recently, improvement in reliability has become a subject to push forward in conjunction with the reorganization and integration of product system, and it has resulted in the environmental test being effected on each of components, to say nothing of products. Among these tests, a vibration test is not only desired for products used in grueling working circumstan-ces and being looked on as the environmental test in the distribution routes. It is because that the effect of shock in transit having on products is to such an extent that they deteriorate progressively and it often leads products unusable. Needless to say, ordinary products are mostly put in far severer conditi-ons in the distribution routes than in their working condition. The test method simulated the conditions occur on a package during transit and is a effective equipment for package design and performance analysis before production and use.